Network Management

 View Only

  • 1.  configure an aruba 2540

    Posted Jan 30, 2025 02:48 AM

    Hello community,,

    I am an absolute beginner when it comes to aruba switches and have the following problem: Unify AP with 2 ssids should distribute the two networks of a Fritxbox as WLAN via 2 vlans. I have an aruba 2540. how do I have to configure it (cli if possible)?
    Thank you very much!



  • 2.  RE: configure an aruba 2540

    Posted Jan 31, 2025 03:31 AM

    This video series will help you to get started: https://www.youtube.com/watch?v=YvYXoc8xVpk&list=PLsYGHuNuBZcZuXwRU4JXMDa-Lm_YIrkBg

    If you know how networks/VLANs work, configure the VLANs that you have as tagged or untagged on the ports to your AP an router, where the tagged or untagged depends on how those other devices are configured, and tagged is called trunk allowed vlan in some other products, and untagged as access vlan or trunk native vlan.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your HPE Aruba Networking partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact HPE Aruba Networking TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or HPE Aruba Networking.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message


  • 3.  RE: configure an aruba 2540

    Posted Feb 05, 2025 10:03 AM

    Use the console port and from there (admin login) type MENU... I hope its still available in the "40".

    Everything you need to set up a switch (with the exception of time and date) can be found there.
    The "menu" feature maks it so easy... to bad they got rid of it.


    Original Message


Related Content