WCL?
The whole point of using a controller with AOS 8 is to tunnel the traffic to the controller, bridge mode APs should be avoided. If bridge mode is necessary, the APs should be deployed in Instant mode or managed by Central so that AOS 10 is usable.
Your switchport configuration doesn't include VLAN 48 in the allowed VLAN list.
------------------------------
Carson Hulcher, ACEX#110
------------------------------
Original Message:
Sent: May 22, 2024 03:58 PM
From: ochapsil@sirt.com
Subject: Configure WCL and access points in mode bridge
I have configured access points with WCL in mode tunnel, it is working ok, but the customer wants the APs and WCL 7220 in mode bridge.
I configured on switch aruba 6200 the port in mode trunk for access points with vlan 48 untagged to APs managment and others vlan for SSID, I configured on the WCL7220 the SSID in mode bridge, but APs received not IP adresses
this is the switch configuration
int 3/1/1
description APs
no shutdown
mtu 9198
no routing
vlan trunk native 48
vlan trunk allowed 17,18,28,68,96,216