Hi Priyank,
Our company recently purchased several Aruba 2930F switches and would like to utilize them in our five offices which are each in a differnet city. We want to configure the switches to use DHCP to provide IP addresses on each of our five different subnets. We currently use Windows Server 2008 DHCP service to provide the addresses.
Windows DHCP servers also have to be authorized on the domain. How is this accomplished at the command line for the 2930F.
Also, if there a prescribed order that the commands need to be entered.
The Windows DHCP servers provide the following information to our clients.
IP address assignment from a defined range of addresses in our DHCP pool
Lease duration when lease is granted Ex. 8 days
Default router address
IP Address of DNS servers
DNS domain name
Lease reservations for some devices
Could you please explain how this same configuration would be applied from the 2930F command line as these configuration options are not provided in the web based GUI.
Thank you for any assistance/guidance you may be able to provide.