Hello guys I'm in a situation in which I need to configure a manual cluster because will be using g CoA and also microbranch
I have never done this before because I have configured it but with the automatic cluster.
- On the group level, I go and turn the auto cluster off
- Click plus on clusters
- Put a name of the cluster
- check for coa and VPN termination for microbranch (ill have a remote ap so I guess the microbranch will work for that? the clients used to have some remote APs and we need to configure this)
- The vrrp vlan could be the system vlan??
- The vrrp IP is the Virtual IP address in which in my case ill add that one to Clearpass as NAD?
- Do I need to fill ID and passphrase field?
- Guess I will do this config at the group level.
- Do I need to configure anything on the redundancy tab? or that's all? if not when do I need to configure something there?
Thanks