Wired Intelligent Edge

 View Only
  • 1.  Configuring QoS Traffic Shaping with Aruba 6300

    Posted Nov 02, 2021 04:24 AM
    Edited by Qais Nov 02, 2021 04:27 AM
      |   view attached
    Hi,

    I am new with Aruba Switches and I need some help, please.

    I have 3 Aruba 6300 switches for 3 Sites that are connected to each other through ISP as shown in the picture.

    I want to configure interfaces traffic shaping to make switches send traffic with the speed supported by ISP and also I want to configure queue priority and Policing based on ACLs or destination IP.

    do the switches support this type of QoS?

    and please I want a config Guide for Aruba QoS

    Thanks,


    ------------------------------
    Qais Sherfeed
    ------------------------------


  • 2.  RE: Configuring QoS Traffic Shaping with Aruba 6300

    Posted Nov 02, 2021 07:13 PM
    this guide should help
    https://www.arubanetworks.com/techdocs/AOS-CX/10.08/HTML/qos_6200-6300-6400/Content/home.htm

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba.
    ------------------------------



  • 3.  RE: Configuring QoS Traffic Shaping with Aruba 6300

    Posted Nov 03, 2021 05:02 AM
    I will see,,,

    Thanks Ariyap

    ------------------------------
    Qais Sherfeed
    ------------------------------