Hello
I got a question regarding this
Yesterday we unpacked a 7010 controller, we were configuring it and all that..
i was there a couple of hours and everything seems to be normal.
Today the controller seems to have the fans of the controller on at max speed and its making a lot of noise like if the fans were going to full speed and it does not turn it off or reducce the speed. Is this normal?
because yesterday it was not noisy, the noise was really small... but today its really noise
Here is the output of the temperature
Can anyone tell me if this is normal???
SC Model# : Aruba7010
HW MAC Addr : 00:0b:86:9a:55:d7 to 00:0b:86:9a:55:f6
CPLD Version : (Rev: 12.8)
Main Board Temperatures :
: U45 - LM95233 Local Temp 32 C (near DDR3)
: Q8 - LM95233 Remote 1 Temp 31 C (near intake right side edge)
: Q12 - LM95233 Remote 2 Temp 33 C (near SFP ports)
: U14 - ADT7476 Local Temp 39 C (near exhaust left side edge)
: U26 - ADT7476 Remote2 Temp 62 C (98DX3036 internal die temp)
Fan 0 : 5869 rpm
Fan 1 : 5818 rpm
Fan 2 : 5812 rpm
#7010