Security

 View Only

  • 1.  CPPM 6.10 and. Hardware appliance C1000

    Posted Jul 11, 2023 10:25 AM

    Hi,

    Just checking whether  you can install  cppm 6.10.x and upwards on a C1000 appliance

    A



  • 2.  RE: CPPM 6.10 and. Hardware appliance C1000

    Posted Jul 11, 2023 11:36 AM

    ClearPass 6.10 & 6.11 support: C1000, C2000 (HPE DL20 Gen9), C2010, C3000 (HPEDL360 Gen9), C3010 hardware appliances.

    ClearPass 6.11 requires a full reinstallation of the software, and backup + restore of the configuration.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message


  • 3.  RE: CPPM 6.10 and. Hardware appliance C1000

    Posted Jul 12, 2023 11:54 AM

    HI Herman,

    Adding onto this question, I have a pair of C3000s on 6.10.8 and we want to migrate to virtual and also upgrade to 6.11 Would it be best to simply fresh install 6.11 on the VM and then restore from the 6.10 hardware backup? 

    Thanks!!


    Original Message


  • 4.  RE: CPPM 6.10 and. Hardware appliance C1000

    Posted Jul 12, 2023 01:30 PM
    That’s what I did here
    New 6.11. Then restore from 6.10 config

    Sent from my iPhone


    Original Message


  • 5.  RE: CPPM 6.10 and. Hardware appliance C1000

    Posted Jul 12, 2023 02:26 PM

    Understood. I guess the question I failed to convey was if it was best practice to: 

    1.) upgrade to 6.11 on the hardware and then migrate to a VM 

    2.) migrate to VM and then upgrade to 6.11 

    3.) migrate directly to an already upgraded 6.11 VM



    Original Message


  • 6.  RE: CPPM 6.10 and. Hardware appliance C1000

    Posted Jul 12, 2023 03:39 PM
    6.11 has to be a fresh install you can’t upgrade an appliance to 6.11 by the normal methods , you have to build a new system (irrespective of. On hardware or vm) and then either type in a new config or import from 6.10


    Sent from my iPhone


    Original Message


  • 7.  RE: CPPM 6.10 and. Hardware appliance C1000

    Posted Jul 12, 2023 04:40 PM

    3 is the easiest. New 6.11 VM, then import backup from 6.10 hardware appliance.

    Other options require re-installation of either the hardware appliance or the VM and upgrade to 6.11 which requires reinstallation is the perfect moment to switch to a new platform (new hardware appliances or VM).



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message


  • 8.  RE: CPPM 6.10 and. Hardware appliance C1000

    Posted Jul 12, 2023 05:08 PM

    I will proceed with 3 then, thank you both for the feedback!!

    Also,  Herman, your ClearPass videos have been extremely helpful.


    Original Message


Related Content