Security

 View Only
Expand all | Collapse all

CPPM COA terminate/bounce problem

This thread has been viewed 5 times
  • 1.  CPPM COA terminate/bounce problem

    Posted Aug 28, 2019 07:35 AM

    Hello

     

    I am trying to get COA working with Aruba switches. 

    Getting error: Radius [ArubaOS Switching - Terminate Session] failed for client

     

    I saw time and NTP settings could be a problem, but this is correct. Time is current and the units are using the same NTP server.

     

    When debugging the Aruba 2530 switch, I see the following when the COA packet are sent to it:

     

    0016:02:58:40.63 RAD tRadiusR:DISCONNECT REQUEST id: 75 from 10.0.0.34 DROPPED,
    Event-Timestamp Attribute is either missing or is not current.

     

    I can see the Timestamp Attribute in the COA action, so it seems to be there. Logic then says the time is wrong, but its correct.

     

    Any tips.



  • 2.  RE: CPPM COA terminate/bounce problem
    Best Answer

    Posted Aug 28, 2019 07:58 AM

    Restart of a couple of CPPM services solved the problem.