Security

 View Only

  • 1.  CPPM static ip profiling

    Posted Jun 19, 2024 05:22 AM

    Hi

    I want to through profiling to identify client device hostname and write to endpoint attribute, but client all uses a static IP address.

    I think DHCP relay to cppm is not helpful.

    Is any other method can profiling?

    Thanks.



  • 2.  RE: CPPM static ip profiling

    Posted Jun 19, 2024 07:59 PM

    you can use subnet scanning with SNMP and also use  a discovery via an ARP-Table read, again using SNMP

    See this section of the guide



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------

    Original Message


  • 3.  RE: CPPM static ip profiling

    Posted Jun 20, 2024 03:57 AM

    Hi

    add device is mean controller or client?

    Thanks.


    Original Message


  • 4.  RE: CPPM static ip profiling

    Posted Jun 20, 2024 05:04 AM

    Device in this context means Controller, Switch, etc. 
    The information will be read by ClearPass via SNMP from Controller or Switch and write it to endpoint Database. This is often used for Client Devices which has static IPs.

    see https://arubanetworks.com/clearpassdocs -> Profiling


    Original Message


Related Content