Wireless Access

Hello,

on some sites i have Aruba (virtual controller) and other sites i have Unifi AP.

Unifi has de ability to ad a second PSK to one SSID en select the Vlan that the clients gets when using this PSK. 

It takes 5 seconds to set this up.

I am looking for the same thing on Aruba AP, not using Radius/clearpass , per device password, etc ... so simple adding second PSK on existing SSID.

Some devices of our education must go to different Vlan, to minimize all de SSID broadcasting I prefer to not using more than the 4 recommended SSID broadcasting.

Is this possible ?

What you are looking for is Local Multiple PSK, at the bottom of this documentation page, which may only configurable through the CLI (not sure).

Hello,

on some sites i have Aruba (virtual controller) and other sites i have Unifi AP.

Unifi has de ability to ad a second PSK to one SSID en select the Vlan that the clients gets when using this PSK. 

It takes 5 seconds to set this up.

I am looking for the same thing on Aruba AP, not using Radius/clearpass , per device password, etc ... so simple adding second PSK on existing SSID.

Some devices of our education must go to different Vlan, to minimize all de SSID broadcasting I prefer to not using more than the 4 recommended SSID broadcasting.

Is this possible ?

What you are looking for is Local Multiple PSK, at the bottom of this documentation page, which may only configurable through the CLI (not sure).

Hello,

on some sites i have Aruba (virtual controller) and other sites i have Unifi AP.

Unifi has de ability to ad a second PSK to one SSID en select the Vlan that the clients gets when using this PSK. 

It takes 5 seconds to set this up.

I am looking for the same thing on Aruba AP, not using Radius/clearpass , per device password, etc ... so simple adding second PSK on existing SSID.

Some devices of our education must go to different Vlan, to minimize all de SSID broadcasting I prefer to not using more than the 4 recommended SSID broadcasting.

Is this possible ?

Thanks for the info,

If I open a SSH to the instant I get the AP prompt, not the Instant prompt... I think this is ok ?

I created a wlan-mpsk-local example_profile with the optional "role" parameter (role i created in the Gui with a Vlan assignment).

How do I connect with SSH to the Instant Virtual controller (running on one AP).

Second, I do not find a step by step adding a SSID, what should i choose under the VLAN step and Access step ?

Someone can show me step by step instruction pleas ?.

What you are looking for is Local Multiple PSK, at the bottom of this documentation page, which may only configurable through the CLI (not sure).

Hello,

on some sites i have Aruba (virtual controller) and other sites i have Unifi AP.

Unifi has de ability to ad a second PSK to one SSID en select the Vlan that the clients gets when using this PSK. 

It takes 5 seconds to set this up.

I am looking for the same thing on Aruba AP, not using Radius/clearpass , per device password, etc ... so simple adding second PSK on existing SSID.

Some devices of our education must go to different Vlan, to minimize all de SSID broadcasting I prefer to not using more than the 4 recommended SSID broadcasting.

Is this possible ?