Wired Intelligent Edge

Hi pals.

The 8360 16Y2C/32Y4C/48Y4C switches require configuration of interface groups (groups of 4 ports) to select speed of 50Gbps. When selected, the upper 2 ports (odd-numbered) in a group are disabled and both bottom ports (even-numbered) can support 50Gbps transceivers. 

Do the bottom ports (even-numbered) can also support 100Mbps/1Gbps/10Gbps /25Gbps transceivers? or they ONLY support 50 Gbps transceivers?

Thanks in advance

Yes, all the SFP28 ports can run at those speeds

LAB-8360-Core1# sh int br
--------------------------------------------------------------------------------------------------------
Port           Native  Mode   Type           Enabled Status  Reason                  Speed   Description
               VLAN                                                                  (Mb/s)
--------------------------------------------------------------------------------------------------------
1/1/1          1       trunk  10G-DAC3       yes     up                              10000   Access Switch
1/1/2          1       trunk  --             yes     down    No XCVR installed       --      Access Switch
1/1/3          1007    trunk  --             yes     down    No XCVR installed       --      vHost-Mgmt
1/1/4          1007    trunk  1G-BT          yes     up                              1000    vHost-Mgmt
1/1/5          1000    access 1G-BT          yes     up                              1000    WAN
1/1/6          1000    access 1G-BT          yes     up                              1000    WAN
1/1/7          2208    access 1G-BT          yes     up                              1000    Meraki LAN
1/1/8          2228    access 1G-BT          yes     up                              1000    Meraki WAN
1/1/9          1       trunk  10G-SR         yes     up                              10000   LAG5 port
1/1/10         1       trunk  10G-SR         yes     up                              10000   LAG 21
1/1/11         1       trunk  10G-SR         yes     up                              10000   LAG1 Port
1/1/12         1       trunk  10G-SR         yes     up                              10000   LAG2 port
1/1/13         1       trunk  10G-DAC        yes     up                              10000   LAG11 Port
1/1/14         --      routed 1G-BT          yes     up                              1000    Heartbeat
1/1/15         1       trunk  25G-DAC3       yes     up                              25000   ISL port 1
1/1/16         1       trunk  25G-DAC3       yes     up                              25000   ISL port 2
1/1/17         1       trunk  40G-DAC        yes     up                              40000   LAG10 Port
1/1/18         1       trunk  100G-DAC1      yes     up                              100000  LAG20 Port

Hi pals.

The 8360 16Y2C/32Y4C/48Y4C switches require configuration of interface groups (groups of 4 ports) to select speed of 50Gbps. When selected, the upper 2 ports (odd-numbered) in a group are disabled and both bottom ports (even-numbered) can support 50Gbps transceivers. 

Do the bottom ports (even-numbered) can also support 100Mbps/1Gbps/10Gbps /25Gbps transceivers? or they ONLY support 50 Gbps transceivers?

Thanks in advance

Hi pals.

The 8360 16Y2C/32Y4C/48Y4C switches require configuration of interface groups (groups of 4 ports) to select speed of 50Gbps. When selected, the upper 2 ports (odd-numbered) in a group are disabled and both bottom ports (even-numbered) can support 50Gbps transceivers. 

Do the bottom ports (even-numbered) can also support 100Mbps/1Gbps/10Gbps /25Gbps transceivers? or they ONLY support 50 Gbps transceivers?

Thanks in advance

I think I should give more context to my question.

Talking about 8360 32Y4C model with AoS CX 10.15:
Command: system interface-group, configures speed for an interface group.
Syntax: system interface-group <GROUP> speed <SPEED>
Parameter <SPEED>, configures transceiver speed (10g, 25g or 50g) for a group. Default is 25g.

Suppose I enter the following command: 
system interface-group 3 speed 25g

Does this allow 1 Gbps, 10 Gbps or 25 Gbps transceivers in the four member ports of the group, or it only allows 25 Gbps transceivers in those ports?

What if the command is: system interface-group 3 speed 50g ? does it allow 1 Gbps, 10 Gbps, 25 Gbps or 50 Gbps transceivers in only the 2 bottom member ports of the group, or it only allows 50 Gbps transceivers in those 2 ports?

What if the command is: system interface-group 3 speed 10g ? Does this allow 1 Gbps or 10 Gbps transceivers in the four member ports of the group or it only allows 10 Gbps transceivers?

Note: I think everybody uses Intangi IRIS, if you configure this switch, you can see that ports 5 to 32 can support 100M SFP transceivers (J9054D). Is this an error, because support for this transceiver is no mentioned in the transceiver guide.

Regards

Hi pals.

The 8360 16Y2C/32Y4C/48Y4C switches require configuration of interface groups (groups of 4 ports) to select speed of 50Gbps. When selected, the upper 2 ports (odd-numbered) in a group are disabled and both bottom ports (even-numbered) can support 50Gbps transceivers. 

Do the bottom ports (even-numbered) can also support 100Mbps/1Gbps/10Gbps /25Gbps transceivers? or they ONLY support 50 Gbps transceivers?

Thanks in advance