Wired Intelligent Edge

 View Only

  • 1.  CX6100 vlan issue

    Posted May 31, 2022 08:09 AM
    Hi,

    I have a CX6100 with latest firmware, my issue is device on port 2>6 is not able to access my default vlan1 untagged, why ?


    6100(config)# sh running-config
    Current configuration:
    !
    !Version ArubaOS-CX PL.10.09.1020
    !export-password: default
    user admin group administrators password ciphertext AQBapTC/1bLHsbZLPYgAAAG8XEIwsmAP+7vYdpE/JYTO4qSHhnsCE6jF2beB5wpVIrMweAo9DxC/dpmJEc7bQxZ/3HdMt6ajgP81LWrUa2Gom8REcJJuJKOb00xlUbeZf8
    ntp server pool.ntp.org minpoll 4 maxpoll 4 iburst
    ntp enable
    !
    !
    !
    !
    !
    !
    ssh server vrf default
    ssh key-exchange-algorithms curve25519-sha256 curve25519-sha256@libssh.org ecdh-sha2-nistp256 ecdh-sha2-nistp384 ecdh-sha2-nistp521 diffie-hellman-group-exchange-sha256 diffie-hellman-group16-sha512 diffie-hellman-group18-sha512 diffie-hellman-group14-sha256 diffie-hellman-group14-sha1
    vlan 1
    vlan 322
    name WiFi-Guest
    spanning-tree
    interface 1/1/1
    no shutdown
    description Sonicwall X0
    vlan access 1
    interface 1/1/2
    no shutdown
    description Sonicwall X2
    vlan trunk native 1
    vlan trunk allowed 322
    interface 1/1/3
    no shutdown
    description AccessPoint
    vlan trunk native 1
    vlan trunk allowed 322
    interface 1/1/4
    no shutdown
    description AccessPoint
    vlan trunk native 1
    vlan trunk allowed 322
    interface 1/1/5
    no shutdown
    description AccessPoint
    vlan trunk native 1
    vlan trunk allowed 322
    interface 1/1/6
    no shutdown
    description AccessPoint
    vlan trunk native 1
    vlan trunk allowed 322
    interface 1/1/7
    no shutdown
    vlan access 1
    interface 1/1/8
    no shutdown
    vlan access 1
    interface vlan 1
    ip address 192.168.16.2/24
    no ip dhcp
    ip route 0.0.0.0/0 192.168.16.1
    !
    !
    !
    !
    !
    https-server vrf default

    ------------------------------
    Mark Pallesen
    ------------------------------


  • 2.  RE: CX6100 vlan issue

    Posted May 31, 2022 08:17 AM
    Edited by -Alex- May 31, 2022 08:16 AM
    Hello Mark,

    You may have to allow vlan 1 and you may use "no routing" under the interface (it should like the following example):

    interface 1/1/3
    no shutdown
    no routing
    description AccessPoint
    vlan trunk native 1
    vlan trunk allowed 1, 322

    Hope this helps!

    ------------------------------
    -Alex-
    ------------------------------

    Original Message


  • 3.  RE: CX6100 vlan issue

    Posted May 31, 2022 08:18 AM
    Hi Mark,

    Maybe because you didn't allow it? Try this:

    interface 1/1/2
no shutdown
description Sonicwall X2
vlan trunk native 1
vlan trunk allowed 1,322​


    ------------------------------
    Ivan Bondar
    ------------------------------

    Original Message


Related Content