Wireless Access

 View Only

  • 1.  datapath session flags

    Posted May 10, 2021 07:44 AM
    hello Airheads,
    we were running a datapath session on the CLI of an Aruba 7200 series controller.
    The output is below and is between 2 voice clients all good.
    However the customer asked what does the "vlan 211" field mean in the datapath session output below.
    Because they say they dont have a VLAN 211 on their network.
    Any ideas?
    pete

    #show datapath session table 172.16.5.15 | include 172.16.4.220
    172.16.5.15 172.16.4.220 17 40000 40000 0/0 6 56 0 vlan 211 2 27 5400 FHPTCIQV
    172.16.5.15 172.16.4.220 17 40001 40001 0/0 6 56 0 sysmsg 107 2 2 284 FRHPCV
    172.16.4.220 172.16.5.15 17 40001 40001 0/0 6 56 0 sysmsg 107 2 1 128 FRHPV
    172.16.4.220 172.16.5.15 17 40000 40000 0/0 6 56 0 vlan 211 2 56 11200 FHPTIQV

    ------------------------------
    Pete Elms
    ------------------------------


  • 2.  RE: datapath session flags

    Posted May 10, 2021 09:13 AM
    That could be a VLAN that is not attached to a physical interface.  TAC would have to look at the tech support and determine that.

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    ------------------------------

    Original Message


  • 3.  RE: datapath session flags

    Posted May 10, 2021 09:27 AM
    hello Colin,
    thanks for getting back.
    it's just a bit of an oddity because the voice clients land on VLAN 31.
    They say there's no VLAN 211 on their network.
    i was wondering whether i was reading it wrong !!
    cheers
    pete

    ------------------------------
    Pete Elms
    ------------------------------

    Original Message


Related Content