Dear All,
I have s 5406Rzl2 J9850A Switch where are configurated many ACLs.
All of them end with a deny log rule for all the "other" traffic not listed in the permit rows above.
ex. deny ip 10.11.0.0 0.0.255.255 0.0.0.0 255.255.255.255 log
I read thet in the debug it should give me deatails about the first packet that hit the deny rule and then summarize the next packets, but in my case i only see the summary.
What i need, is to get the detail about the source ip the destination ip and the port that hit the deny rule, instead i only get the summary:
show debug buffer | VLAN_E80
0015:16:47:23.05 ACL mClistCtrl:12/04/20 06:28:13 : Router ACL VLAN_E80,
seq#3810 denied 149 packets, direction in
My debug config is:
show debug
Debug Logging
Source IP Selection: Outgoing Interface
Origin identifier: Outgoing Interface IP
Destination:
Memory buffer
Time-stamp: System-Uptime
Enabled debug types:
event
acl log
thanks for any advices
------------------------------
Davide
------------------------------