Hello guys,
the question is pretty simple: into which VLAN will be assigned untagged frame reaching interface 48?
related switch configuration part:
sw1#show run
...
interface 48
speed-duplex auto-1000
exit
vlan 1
name "DEFAULT_VLAN"
untagged 3,A1-A4
no untagged 1-2,4-48
no ip address
exit
vlan 580
name "LAN"
untagged 4,6-47
ip address 10.31.137.100 255.255.255.0
tagged 1,3,48
exit
vlan 2
name "Firewall_Interconnect"
untagged 2
ip address 172.16.22.13 255.255.255.0
tagged 1,3
exit
vlan 544
name "Fail_Over"
tagged 3,5,48
no ip address
exit
vlan 545
name "Stateful"
tagged 3,5,48
no ip address
exit
vlan 546
name "Backup"
tagged 3,48
no ip address
exit
... (but no more vlan's)
sw1# show vlans ports 48
Status and Counters - VLAN Information - for ports 48
VLAN ID Name | Status Voice Jumbo
------- -------------------- + ---------- ----- -----
544 Fail_Over | Port-based No No
545 Stateful | Port-based No No
546 Backup | Port-based No No
580 LAN | Port-based No No
If you are looking for any "untagged 48" directive, yes, there is nothing like that :)
Switch: ProCurve J9050A Switch 2900-48G
Version:
sw1# show version
Image stamp: /sw/code/build/mbm(t3a)
Sep 11 2009 09:01:43
T.13.71
422
Boot Image:
thank you very much
P.S. This thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to ProCurve / ProVision-Based -HP Forum Moderator