Wired Intelligent Edge

Szenario:

DHCP Relays on the router in the Core-Network for multiple VLANs and I want to use DHCP-Snooping at the Access-Layer with the ArubaOS-Switch 2530-Series. (DHCP-Server is running on VM)

For DHCP-Snooping i have to configure "dhcp-snooping authorized-server". For example the DHCP-Server.

Did i have to set the interface-adresses from the VLANs with DHCP-Relays as "dhcp-snooping authorized-server" ,too?

Cause i mean DHCP-Snooping acts at Layer 2.

Thanks 4 answers. 

I had Procurve edge switches and a 3COM core - I had to add in the 3COM cores as authorised DHCP servers.

The Core is a 3COM, too. So i have to add all vlan interfaces from the core? 

Would be great if you  could add the DHCP-Servers only... :/

A 3COM core switch *is* a DHCP server.

Unlike other vendors, it doesn't just proxy the DHCP requests through, it actually acts as a DHCP server itself.

You shouldn't have too much work to do - your Access switches only need the VLAN interfaces for their local Data and Voice VLANs - should only be two there to do, right?

There will be some more Interfaces to add, cause we use 802.1x with RADIUS to set the VLAN on the access port. 

The work isnt a problem. I just want to understand the configuration :) 

Thanks 4 your reply.