Wireless Access

Hi,

 Aruba OS 6.4, Controller 7030 and AP's 205, 215..

I know that is several ways to shut AP's ( in a VAP, Poe shutdown, create an AP group with Radios OFF) but is there anyway to shut just one AP ?

Regards

Create a radio profile on the a band and the g band that has radios off.  Apply it to an AP specific profile:

config t
ap-name "Kitchen-225"
  dot11a-radio-profile "shutdown"
 dot11g-radio-profile "shutdown"

Hi cjoseph

I see this

config t
rf dot11a-radio-profile test
no radio enable
exit
rf dot11g-radio-profile test
no radio enable
exit
ap-group no-radio
dot11a-radio-profile test
dot11g-radio-profile test
 

Can I create that profile under webgui?

regards

 Go to Configuration> Wireless> AP Configuration> AP Specific.  Select your AP, Click on your AP, Expand Wireless LAN> Click on 802.11a radio and create a NEW Radio Profile with the radios off...

Delete the AP-specific configuration to remove the specific config and allow the ap-group configuration to take over.

What is the 8.x way to do this? I want to temporarily shutdown the radios of a specific AP, without moving AP groups, etc. 

AP-specific is only available on the commandline in 8.x

cd /md/<path to your config>

config t

ap-name <name of ap>

dot11a-radio-profile rp-scan-a