Controllerless Networks

 View Only
last person joined: yesterday 

Instant Mode - the controllerless Wi-Fi solution that's easy to set up, is loaded with security and smarts, and won't break your budget
Back to discussions
Expand all | Collapse all

divide the users into each category within a vlan and take the addresses from a separate pool

This thread has been viewed 8 times

  • 1.  divide the users into each category within a vlan and take the addresses from a separate pool

    Posted 29 days ago

    I want to divide the users into each category within a vlan and take the addresses from a separate pool

    I had in my company all users take IP from one DHCP pool associated with VLAN 11

    I created a new pool, called it pool12, and created vlan 12

    So users connected to vlan 11 receive IP addresses from pool11

    Users connected to vlan 12 receive IP addresses from pool12

    The problem is when I convert the outlet connected between the controller and the access point to a trunk. Access point turns off!!!!



  • 2.  RE: divide the users into each category within a vlan and take the addresses from a separate pool

    Posted 27 days ago

    Please work with your Aruba partner or TAC. There is too much information missing to guide you in the right direction, and it's a pretty basic question/topology.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message