Wired Intelligent Edge

I have  a 6 module and a 12 module chassis. They are 5406 and 5412 R zl2. When I do show module detail, they are J9827A ( the management modules). When I do show run the top says JL9850A and JL9851A. I was looking to find the firmware and I do not see it for J9827A. If I type in the model (5406 or 5412) I get the right model, but it is for J9821A and J9822A.

Am I looking at the wrong product numbers? I know one model switch I have doesn't seem to have any firmware updates (JL693A) so maybe these chassis do not either?

I believe it should be this one? the 5412R ZL2 chassis should be part number J9822A.
The partnumber is visable on the front of your chassis.

https://www.arubanetworks.com/techdocs/AOS-Switch/RN/16.11/AOS-S%2016.11.0002%20Release%20Notes.pdf
https://asp.arubanetworks.com/downloads/software/RmlsZToxZTA1YzliMC0yNmQ1LTExZWMtYjJmOC0yYjdjMTZmMzgwNmU%3D

------------------------------
Marcel Koedijk | MVP Guru 2021 | ACEP | ACMP | ACCP | ACDP | Ekahau ECSE | Not an HPE Employee | Opionions are my own
------------------------------

Original Message:
Sent: Dec 02, 2021 04:36 PM
From: Ashour Shamoon
Subject: Firmware version upgrade question

I have  a 6 module and a 12 module chassis. They are 5406 and 5412 R zl2. When I do show module detail, they are J9827A ( the management modules). When I do show run the top says JL9850A and JL9851A. I was looking to find the firmware and I do not see it for J9827A. If I type in the model (5406 or 5412) I get the right model, but it is for J9821A and J9822A.

Am I looking at the wrong product numbers? I know one model switch I have doesn't seem to have any firmware updates (JL693A) so maybe these chassis do not either?

You are correct... After some more looking, I found a post from Parnassus on an HPE forum where he explained it. the 5406 uses J9821A and the 5412 uses J9822A... 

Solved: Where can I find firmware for J9827A? - Hewlett Packard Enterprise Community (hpe.com)
Original Message:
Sent: Dec 02, 2021 05:29 PM
From: marcel koedijk
Subject: Firmware version upgrade question

I believe it should be this one? the 5412R ZL2 chassis should be part number J9822A.
The partnumber is visable on the front of your chassis.

https://www.arubanetworks.com/techdocs/AOS-Switch/RN/16.11/AOS-S%2016.11.0002%20Release%20Notes.pdf
https://asp.arubanetworks.com/downloads/software/RmlsZToxZTA1YzliMC0yNmQ1LTExZWMtYjJmOC0yYjdjMTZmMzgwNmU%3D

------------------------------
Marcel Koedijk | MVP Guru 2021 | ACEP | ACMP | ACCP | ACDP | Ekahau ECSE | Not an HPE Employee | Opionions are my own

Original Message:
Sent: Dec 02, 2021 04:36 PM
From: Ashour Shamoon
Subject: Firmware version upgrade question

I have  a 6 module and a 12 module chassis. They are 5406 and 5412 R zl2. When I do show module detail, they are J9827A ( the management modules). When I do show run the top says JL9850A and JL9851A. I was looking to find the firmware and I do not see it for J9827A. If I type in the model (5406 or 5412) I get the right model, but it is for J9821A and J9822A.

Am I looking at the wrong product numbers? I know one model switch I have doesn't seem to have any firmware updates (JL693A) so maybe these chassis do not either?

Hi! Glad that thread on HPE Community helped!

------------------------------
Davide Poletto
------------------------------

Original Message:
Sent: Dec 02, 2021 06:03 PM
From: Ashour Shamoon
Subject: Firmware version upgrade question

You are correct... After some more looking, I found a post from Parnassus on an HPE forum where he explained it. the 5406 uses J9821A and the 5412 uses J9822A... 

Solved: Where can I find firmware for J9827A? - Hewlett Packard Enterprise Community (hpe.com)
Original Message:
Sent: Dec 02, 2021 05:29 PM
From: marcel koedijk
Subject: Firmware version upgrade question

I believe it should be this one? the 5412R ZL2 chassis should be part number J9822A.
The partnumber is visable on the front of your chassis.

https://www.arubanetworks.com/techdocs/AOS-Switch/RN/16.11/AOS-S%2016.11.0002%20Release%20Notes.pdf
https://asp.arubanetworks.com/downloads/software/RmlsZToxZTA1YzliMC0yNmQ1LTExZWMtYjJmOC0yYjdjMTZmMzgwNmU%3D

------------------------------
Marcel Koedijk | MVP Guru 2021 | ACEP | ACMP | ACCP | ACDP | Ekahau ECSE | Not an HPE Employee | Opionions are my own

Original Message:
Sent: Dec 02, 2021 04:36 PM
From: Ashour Shamoon
Subject: Firmware version upgrade question

I have  a 6 module and a 12 module chassis. They are 5406 and 5412 R zl2. When I do show module detail, they are J9827A ( the management modules). When I do show run the top says JL9850A and JL9851A. I was looking to find the firmware and I do not see it for J9827A. If I type in the model (5406 or 5412) I get the right model, but it is for J9821A and J9822A.

Am I looking at the wrong product numbers? I know one model switch I have doesn't seem to have any firmware updates (JL693A) so maybe these chassis do not either?