Original Message:
Sent: Jun 26, 2024 07:24 AM
From: technical_debt_collector
Subject: First ever VIA setup getting error show aaa authentication via auth-profile "A"" (len: 45), err: %
VIA not licenced dropping IKE request
Original Message:
Sent: Jun 25, 2024 05:53 PM
From: technical_debt_collector
Subject: First ever VIA setup getting error show aaa authentication via auth-profile "A"" (len: 45), err: %
I'm deploying my first VIA remote access and Mobily controller into a virtual environment
so I can POC a customer migration.
Mobility Controller Version 8.12.0.1 ( to match the customer )
VIA Client 4.6.0.0 ( to match the customer )
Closely following this guide.
https://www.arubanetworks.com/techdocs/VIA/3x/content/via%20config/configuring_via_settings.htm
configuring the Pre-Shared Key (PSK) done
|
( abc123 )
|
|
Uploading Certificates for Certificate-Based Authentication
|
( not done as not certbased auth )
|
|
Enabling VPN Server Modules
|
Done PEFV licence installed
|
|
Creating VIA User Roles
|
skipped will use
default-via-role
|
|
Creating VIA Authentication Profiles
|
skipped uses Server Group "internal"
|
|
Creating VIA Connection Profiles
|
I'm unsure how the system will allocate IP addresses to the VPN clients using the default connection profile, Added a single network to tunnel in the VIA Connection default I think this might be a missing component
|
|
Associating VIA Connection Profiles to User Roles
|
Skipped will use defaults
|
|
Configuring VIA Web Authentication Profiles
|
Default added to the profile Change made
|
|
Configuring VIA Client WLAN Profiles
|
Skipped
|
|
Configuring Additional VIA Options
|
Skipped
|
|
Rebranding VIA
|
Skipped
|
|
Uploading VIA Installers
|
Skipped
|
|
Download the VIA Installer
|
Skipped
|
|
setup a user
|
under Authentication > Auth Server internal created a new user username: test
password: password
role is default-via-role
|
|
Should this be enough for the client to work in the most basic lab setup ? my client is in the same subnet as the controller.
when I try to connected
on the client:
client encountered an internal error.
profile selection cancelled
The logs on the mobility control do not give anything
Any assistance appreciated thanks
Simon