Network Management

 View Only
  • 1.  Help with IMC and switch privilege-mode

    Posted Apr 14, 2014 01:44 AM

    Hello

    I want create user in imc for access the switch and set every user privilege level like some user only fiest level operator level and some operator level and i choose some coomd for the user to use and user with full access admin 

     

    my question is what the best Module in the IMC for this ?

    1- User Access Management Module

    2- TACACS+ Authentication Manager

    ??

    thank you



  • 2.  RE: Help with IMC and switch privilege-mode

    Posted Apr 14, 2014 09:56 PM
    TACACS+ is the right component that you should configure.


  • 3.  RE: Help with IMC and switch privilege-mode

    Posted Apr 15, 2014 12:55 AM

    Hello Thunder_China

    thank you for replay

    can i do the configure i want in  User Access Management Module ? the same in  TACACS+ or not ?

     

    thank you



  • 4.  RE: Help with IMC and switch privilege-mode

    Posted Apr 15, 2014 03:55 AM
    UAM component focuses on how PC client accesses the network, and TAM(TACACS+ Authentication Manager) component focuses on what commands the user (telnet or ssh) can execute after login the device.


  • 5.  RE: Help with IMC and switch privilege-mode

    Posted Apr 16, 2014 06:58 AM

    Hello Thunder_China

    so if i need to focuses on what commands the user use example (show vlan or sh ip ...) or which level (operator or manager) i need TAM(TACACS+ Authentication Manager  ?!!

     

    Thank you

     

     

     



  • 6.  RE: Help with IMC and switch privilege-mode

    Posted Apr 16, 2014 07:24 AM
    Sorry, I am not very familar with TAM component, but I guess both of commands and level are supported.