Wireless Access

 View Only
  • 1.  hospital telemetry, WESM zl, RP230 problem

    Posted Aug 23, 2008 12:43 PM
    Hello,

    we have deployed WESM ZL witin 5406zl and we have 12 radio ports attached to this controller. We have issue with this device:

    http://www.schiller.ch/Products/Monitoring/Patient_Monitoring/ARGUS_PRO_Telemetry_TM-1/-45-616-223-en-hq-/cms.html

    This device connects but has poor throughput depening on number of lost pings. We have put this device next to RP230 just to avoid any issues that maybe signal is weak. Also there is nothing on this network, only one WLAN for this purpose (this hospital is about to begin working).

    Manufacturer claims that these devices works without problems with Cisco AIR-AP1231G-E-K9. Also they provided working configuration of CISCO.

    Using notebooks, iPAQ 214, 514 is no problem on this WLAN. Only this device can't work properly.

    Any idea where to look?

    Damir


  • 2.  RE: hospital telemetry, WESM zl, RP230 problem

    Posted Aug 23, 2008 03:13 PM
    Hi

    - Any technical specifications for this device ?

    - Have you tested BY your Self with a wireless access point like the Cisco one ?

    Good Luck !!!


  • 3.  RE: hospital telemetry, WESM zl, RP230 problem

    Posted Aug 23, 2008 03:30 PM
    Device itself is running some kind of linux and using this as WLAN chip

    http://www.connectblue.com/fileadmin/Connectblue/Web2006/Products/Wlan/W22/Documents/ProductBrief_OWLAN211g.pdf

    Cisco AP is on the way. But today device was working in close range with some kind of DLINK AP ..