Configure your switchports as trunk port with native vlan 10 or vlan 10 untagged and 102,103,105 as tagged/trunk allowed VLANs.
Don't configure anything about vlan 10 on your IAPs, leave management VLAN configuration empty, then it will take the untagged/native VLAN, which is in the switch linked to 10.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Feb 01, 2024 01:55 AM
From: Yb
Subject: How to deploy AP515 to aruba central in IAP mode with management vlan 10?
Hi,
Anyone has experience to share to deploy AP515 to aruba central with management vlan 10 from core switch? I know the default vlan always is vlan 1, but is there any possible to change the management vlan to vlan 10? I try before but no successful.
Switch side:
Port configured in trunk mode.
Management vlan= vlan 10
SSID vlan= vlan 102(staff), 103(guest) and 105(director)
Thank you