Wireless Access

 View Only
last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

How to disable the same SSID on multiple 7005 controller networks?

This thread has been viewed 13 times

  • 1.  How to disable the same SSID on multiple 7005 controller networks?

    Posted May 18, 2022 05:59 PM
    Hi,

    I've got dozens of 7005 controllers, running 6.5, which have a particular SSID. I need these SSIDs to be disabled. Then I'll delete them in the future. The controllers all use a 7210 as a master.

    There's no way for me to do this on multiple controllers, I don't think. So is it a CLI I have to script, or a point-and-click exercise for each controller?

    Thanks,

    Ambi

    ------------------------------
    Ambidexter
    ------------------------------


  • 2.  RE: How to disable the same SSID on multiple 7005 controller networks?

    EMPLOYEE
    Posted May 18, 2022 08:47 PM
    If they all have the same virtual AP, you should disable the virtual AP and the SSID will not appear.

    ------------------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    HPE Design and Deploy Guides: https://community.arubanetworks.com/support/migrated-knowledge-base?attachments=&communitykey=dcc83c62-1a3a-4dd8-94dc-92968ea6fff1&pageindex=0&pagesize=12&search=&sort=most_recent&viewtype=card
    ------------------------------

    Original Message


  • 3.  RE: How to disable the same SSID on multiple 7005 controller networks?

    Posted May 19, 2022 12:34 PM
    Hi,

    I figured it out. Thanks

    -A

    ------------------------------
    Ambidexter
    ------------------------------

    Original Message