Comware

 View Only
Expand all | Collapse all

HP-A5120-EI-POE x Link-Aggregation

This thread has been viewed 0 times
  • 1.  HP-A5120-EI-POE x Link-Aggregation

    Posted May 02, 2013 02:30 PM

    Hi

    I was working on the tests with the Link-aggregation in HP A5120-EI-POE and A5120_EI and had some problems.

    For example in the link-aggregation with two ports gigabit, the traffic always is very larger for one of the Link port, the other stays with 1% of the traffic volume.

    Add more ports to try to improve the distribution, but without success, the result was the same.

    Why just a door does it work?

    Other problem is that see in the link-aggregation verbose all the ports selected, with Loadsharing, the link in 4G for example, only that the transfer rate is spill from 10% to 12%  of the theoretical value of the link.

    If someone has a piece of information, I thank.
    Greetings

    Tomaz



  • 2.  RE: HP-A5120-EI-POE x Link-Aggregation

    Posted May 03, 2013 03:36 AM

    Probably using the wrong hashing mechanism to match your traffic flow. Link-aggregation is per flow and can use different hash to match flows. Default will probably be src/dst mac or IP, it will probably show in display link-aggregation somewhere.

     

    And as you may have figured, because of above, a single flow will only use one link. So you can't really test this good without a couple of hosts or a couple of flows depending on your hash mechanism.