Hi All,
I would appreciate your help to resolve the VLAN issue. I have replaced the Cisco Catalyst 2960X switch with the HP Aruba 8100 Switch. But have a VLANs passing challenge.
VLAN Configuration on Aruba 8100
VLAN1
VLAN100
Interface 1/1/24-28 Trunk, Native Untagged, Allowed ALL
BGTSW12(config-if)# show vlan
------------------------------------------------------------------------------------------------------------------
VLAN Name Status Reason Type Interfaces
------------------------------------------------------------------------------------------------------------------
1 DEFAULT_VLAN_1 up ok default 1/1/1-1/1/28
100 BGT-Guest up ok static 1/1/24-1/1/28
BGTSW12(config-if)# show interface 1/1/25-1/1/28 brief
----------------------------------------------------------------------------------------------------------
Port Native Mode Type Enabled Status Reason Speed Description
VLAN (Mb/s)
----------------------------------------------------------------------------------------------------------
1/1/25 1 trunk 1G-LX yes up 1000 --
1/1/26 1 trunk 1G-LX yes up 1000 --
1/1/27 1 trunk 1G-LX yes up 1000 --
1/1/28 1 trunk 1G-LX yes up 1000 --