Comware

Hello.

 

According to HP 1910 Switch Series User Guide-R1511 after configuring RADIUS scheme you should be able to choose this scheme in AAA (page 365).

Unfortunately, in my case "Name" drop-down list is empty.

 

------------------------------------------------------------------
SchemeName  : system
  Index : 0                           Type : standard
  Primary Auth Server:
    IP: 192.168.1.220                            Port: 1812   State: active
    Encryption Key : N/A
    Probe username : N/A
    Probe interval : N/A
  Primary Acct Server:
    IP: 192.168.1.220                            Port: 1813   State: active
    Encryption Key : N/A
  Second Auth Server:
    IP: 192.168.1.76                             Port: 1812   State: block
    Encryption Key : N/A
    Probe username : N/A
    Probe interval : N/A
  Second Acct Server:
    IP: 192.168.1.76                             Port: 1813   State: block
    Encryption Key : N/A
  Auth Server Encryption Key : ******
  Acct Server Encryption Key : ******
  Accounting-On packet disable, send times : 50 , interval : 3s
  Interval for timeout(second)                            : 3
  Retransmission times for timeout                        : 3
  Interval for realtime accounting(minute)                : 12
  Retransmission times of realtime-accounting packet      : 5
  Retransmission times of stop-accounting packet          : 500
  Quiet-interval(min)                                     : 5
  Username format                                         : without-domain
  Data flow unit                                          : Byte
  Packet unit                                             : one
  NAS-IP address                                          : 192.168.1.4


------------------------------------------------------------------

Could someone please give me some advices?

Hi, I am also experiencing this issue. I have tried a couple of configuration options but none seem to bring the RADIUS Schema Name into the dropdown list. Inspecting the config file doesn't reveal anything in particular that could cause this. Upgrading to the latest firmware from the 10th of Apri 2013 also does not resolve the issue. Perhaps HP could resond to this issue?

I have found that versions V1910-CMW520-R1513P07 to version V1910-CMW520-R1513P15 are affected. The issue does not occur in version V1910-CMW520-R1513P06.