You probably have more success posting your question in the Instant ON forum.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your HPE Aruba Networking partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact HPE Aruba Networking TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or HPE Aruba Networking.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: May 09, 2025 10:19 AM
From: JamesFromIT
Subject: HPE AP11 - Configure DHCP Lease Time on Guest Networks
Hello!
I'm slowly starting to pull my hair out over trying to figure out how to configure the DHCP lease time on guest networks on these APs. Currently, the default lease time is 30 minutes on the guest network. I can't find anything online on how to configure the lease time, nor can I find anything in the Instant On configuration to allow me to change this setting. Does anyone have any suggestions?
Many thanks!
JamesFromIT