Security

 View Only

  • 1.  IAP 103 - VIRtual Controller - Captive Portal

    Posted May 22, 2019 12:15 AM
    Hi

    I am implementing a captive portal and I want to know if I can only do it with IAP as VController or do I need to have another IAP in normal mode connected to the VC?

    Thanks for your support

    David


  • 2.  RE: IAP 103 - VIRtual Controller - Captive Portal

    Posted May 22, 2019 12:26 AM

    You can certainly do it with an IAP only. You have an option to use IAP internal captive portal or use an external captive portal like ClearPass.



  • 3.  RE: IAP 103 - VIRtual Controller - Captive Portal

    Posted Nov 06, 2024 01:54 PM

    just where are the setting to actuall setup a captive portal on a virtual controller.

    I have been looking for 2 days lol


    Original Message


  • 4.  RE: IAP 103 - VIRtual Controller - Captive Portal

    Posted Nov 06, 2024 02:41 PM

    never mind... found it..


    Original Message


  • 5.  RE: IAP 103 - VIRtual Controller - Captive Portal

    Posted Nov 06, 2024 08:54 PM

    Ok, if you need help setting up the captive portal on the VC, please let us know.



    ------------------------------
    Daniel Ruiz
    -----------------------
    Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support.
    Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC.
    ------------------------------

    Original Message


  • 6.  RE: IAP 103 - VIRtual Controller - Captive Portal

    Posted Nov 07, 2024 12:05 AM

    check this section of the user guide



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------

    Original Message


Related Content