If you run in Instant mode, all IAPs in a swarm/cluster must run the same firmware version. If you upgrade a mixed cluster with IAP 303 / 325 to 8.12 and IAP303 is supported IAP 325 is not, you probably lose that IAP-325.
------------------------------
Herman Robers
------------------------
If you have urgent issues, always contact your HPE Aruba Networking partner, distributor, or Aruba TAC Support. Check
https://www.arubanetworks.com/support-services/contact-support/ for how to contact HPE Aruba Networking TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or HPE Aruba Networking.
In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
------------------------------
Original Message:
Sent: Mar 19, 2025 03:37 PM
From: Edas
Subject: IAP 303 and IAP 325
Hello, I have 16 IAP -303RW and one IAP-325. All AP have 8.100.13 LSR firmware. Can I upgrade 303 AP to 8.12? I afraid that 325 will not be visible after upgrade because firmware 8.12 is not for 325 AP.