Wired Intelligent Edge

 View Only

  • 1.  IEEE 802.1ae support for CX 1000

    Posted 19 days ago

    Does CX1000 support IEEE 802.1ad MACSec?. I cannot see this protocol in the datasheet standards list for this switch.

    I have found that campus switches like 2930M support this feature, also DC switch CX 8360 support this feature.

    Why a flagship like CX 10000 seems not to comply with this feature?

    Regards



    ------------------------------
    PMS
    ------------------------------


  • 2.  RE: IEEE 802.1ae support for CX 1000

    Posted 19 days ago

    The CX10K doesn't support MACsec. However, there is support for IPsec.



    ------------------------------
    Willem Bargeman
    Systems Engineer Aruba
    ACEX #125
    ------------------------------

    Original Message


  • 3.  RE: IEEE 802.1ae support for CX 1000

    Posted 19 days ago

    here you can fine CX10K datasheet.



    ------------------------------
    If my post was useful accept solution and/or give kudos.
    Any opinions expressed here are solely my own and not necessarily that of HPE or Aruba.
    ------------------------------

    Original Message


  • 4.  RE: IEEE 802.1ae support for CX 1000

    Posted 18 days ago

    Did you check up on this.

    https://arubanetworking.hpe.com/techdocs/AOS-CX/10.10/PDF/l2_bridging_83xx-9300-10000.pdf

     Page68, 69 and 70.
     



    ------------------------------
    Shpat | ACEP | ACMP | ACCP | ACDP
    Just an Aruba enthusiast and contributor by cases
    If you find my comment helpful, KUDOS are appreciated.
    ------------------------------

    Original Message


Related Content