Understood with Out of Support, its on our Agenda.
So I try to get a quick win, since our Machines are getting Full of devices, I got a AW-HW630-ENT (96 GB RAM) from Aruba we saved and yes we are aware its out of Hardware Support.
I already installed 3 of these, but with DVD. Since I got no DVDs nor a burner, i have to rely on a USB Stick.
Original Message:
Sent: Nov 27, 2024 11:07 AM
From: cordless
Subject: Installing Airwave via USB Stick Issues
With Out od Support I only want to mention that it makes more sense to focus on 8.3. Code Train.
Let´s start from the beginning to get the full picture.
On what device are you trying to install AirWave?
Is it an official AirWave HW Appliance?
Original Message:
Sent: Nov 27, 2024 10:48 AM
From: dschug
Subject: Installing Airwave via USB Stick Issues
Since its a Version we use (15+ Airwaves in sum) and some Machines don't Support Local Iso or Virtual Disc, I still need a solution.
Out of Support won't help us.
So my goal is to install this Version in first instance. I just tried 8.0.3.2 to exclude any issues with the iso.
So why does USB Stick not work. But a DVD worked last time (is not an option, because we can't burn DVDs anymore)
------------------------------
Dennis Schug
Original Message:
Sent: Nov 27, 2024 10:41 AM
From: cordless
Subject: Installing Airwave via USB Stick Issues
Since 8.2.x Version is End-of-Support, I would avoid installing this.
Original Message:
Sent: Nov 27, 2024 10:34 AM
From: dschug
Subject: Installing Airwave via USB Stick Issues
And what about 8.2.15.2? Its the same Issue.
------------------------------
Dennis Schug
Original Message:
Sent: Nov 27, 2024 10:22 AM
From: cordless
Subject: Installing Airwave via USB Stick Issues
Bootable DVD and USB drives are currently not supported for AirWave 8.3.0 installation.
See attached Installation Guide.
Original Message:
Sent: Nov 27, 2024 09:48 AM
From: dschug
Subject: Installing Airwave via USB Stick Issues
Hello,
I'm trying to install Airwave (tried 8.3.0.3 and 8.2.15.2).
I tried several USB Sticks and Software creating Bootable Sticks (unetbootin, rufus, etcher)
Everytime starting Installation it gets stuck on random: crng init done
I also tried Bios and UEFI Boot, but UEFI just shows Grub.
Wasted several hours now and can't figure out a solution.
------------------------------
Dennis Schug
------------------------------