Wireless Access

 View Only
  • 1.  Instant Mesh commands

    Posted Oct 29, 2017 10:56 AM

    Hi community,

     

    Are there any commands to know the status of a mesh link? I have a mesh network, but when I run the commands "show ap mesh link" or "show ap mesh neighbours" I have no output:

    mesh_commands.JPG

    Here you can see the mesh network in the Web UI:

    mesh_WebUI.JPG

    Many thanks in advance!

     

    Regards,

    Julián



  • 2.  RE: Instant Mesh commands
    Best Answer

    Posted Oct 29, 2017 11:02 AM

    It looks like you named an SSID "Mesh Link", but you do not have any mesh links formed.



  • 3.  RE: Instant Mesh commands

    Posted Oct 29, 2017 12:10 PM

    Hi Colin,

     

    Yes it seems so. I have two SSIDs, "Santander CONSUMER" is only 2.4 GHz for users access and "Mesh Link" is only 5 GHz for the mesh and no users access, but it seems the APs are connected by a wired infrastructure. I will investigate.

     

    Regards,

    Julián