Comware

 View Only

  • 1.  isolate-user-VLAN and hybrid tagged ports on 3Com A5500 HI

    Posted Feb 14, 2022 01:34 PM
    Hi,

    we are trying to configure private VLANs on a 3Com A5500 HI switch. The router is on a hybrid tagged port and does not receive the pakets in the isolate-user-VLAN but in the secondary VLAN. The switch seems to not put the outgoing pakets in the correct VLAN.

    Configuration:

    vlan 208
 description pvlan-test-208
 name pvlan-test-208
 isolate-user-vlan enable

vlan 3998
 description iso-208-test
 isolated-vlan enable

interface Bridge-Aggregation1
 description gate-1
 port isolate-user-vlan 208 promiscuous
 port link-type hybrid
 port hybrid vlan 1 to 4094 tagged
 link-aggregation mode dynamic

isolate-user-vlan 208 secondary 3998
​
    We do not have this issue on newer FlexFabric switches.

    Does the 3com A5500 support isolate-user-VLANs on hybrid tagged ports?

    ------------------------------
    Robert Sander
    ------------------------------


  • 2.  RE: isolate-user-VLAN and hybrid tagged ports on 3Com A5500 HI

    Posted Apr 25, 2022 02:08 AM
    Edited by James69 Apr 25, 2022 02:09 AM
    To enable users in the isolate-user-VLAN to communicate with other networks at Layer 3, Configure VLAN interfaces for the isolate-user-VLAN and the secondary VLANs, and configure the gateway IP address for the isolate-user-VLAN interface (you do not need to configure IP addresses for the secondary VLAN interfaces).

    ------------------------------
    James Gross
    ------------------------------

    Original Message


  • 3.  RE: isolate-user-VLAN and hybrid tagged ports on 3Com A5500 HI

    Posted Apr 25, 2022 03:30 AM
    We have the issue on layer 2, not layer 3. As soon as the port is configured as above it cannot talk to other endpoints in the same PVLAN.

    ------------------------------
    Robert Sander
    ------------------------------

    Original Message


Related Content