Forum Français

 View Only
last person joined: 4 days ago 

Bienvenue sur le forum communautaire français d'Airheads.
Expand all | Collapse all

LACP-BLOCK sur les ports

This thread has been viewed 42 times
  • 1.  LACP-BLOCK sur les ports

    Posted May 22, 2024 05:22 AM

    Bonjour,

    Je continue la conf de mes switchs ARUBA. les liens LACP vers les coeur fonctionnent !

    Par contre, j'ai connecté les liens LACP entre les Aruba (lien 1,2,3,4 du schema)  et quand je fais un show lacp interfaces, je vois qu'il est indiqué lacp-block

    J'ai mis tous les liens dans un même LAG, voici la conf :

    interface lag 2 multi-chassis
        description LACP-to-A8100
        no shutdown
        no routing
        vlan trunk native 999
        vlan trunk allowed all
        lacp mode active

    ensuite, les ports sont configures ainsi : (exemple,sur un switch, indentique sur les autres)
    interface 1/1/45
    no shutdown
    lag 2

    interface 1/1/46
    no shutdown
    lag 2

    show lacp interfaces : 

    1/1/45     lag2(mc)   45    1     ALFOE   02:01:00:00:01:00 65534  2    lacp-block
    1/1/46     lag2(mc)   46    1     ALFOE   02:01:00:00:01:00 65534  2    lacp-block

    Je ne vois pas le souci....

    Les logs que j'ai trouvé :
    2024-05-22T10:47:48.656325+02:00 A8100-48X-E011-124 intfd[864]: Event|403|LOG_INFO|AMM|1/1|Link status for interface 1/1/45 is up at 10 Gbps with no FEC
    2024-05-22T10:47:48.690299+02:00 A8100-48X-E011-124 lacpd[869]: Event|1313|LOG_INFO|AMM|1/1|LAG 2 set as VSX
    2024-05-22T10:47:48.692155+02:00 A8100-48X-E011-124 lacpd[869]: Event|1310|LOG_WARN|AMM|1/1|Partner is out of sync for interface 1/1/45 LAG sport: 1. Actor state: ALFOX, partner state PSFO
    2024-05-22T10:47:48.708378+02:00 A8100-48X-E011-124 lacpd[869]: Event|1321|LOG_INFO|AMM|1/1|LAG 2 State change for interface 1/1/45: Actor state: ALIO, Partner state PLIO
    2024-05-22T10:47:48.721175+02:00 A8100-48X-E011-124 lacpd[869]: Event|1321|LOG_INFO|AMM|1/1|LAG 2 State change for interface 1/1/45: Actor state: ALFO, Partner state PLIO
    2024-05-22T10:47:48.725280+02:00 A8100-48X-E011-124 lacpd[869]: Event|1321|LOG_INFO|AMM|1/1|LAG 2 State change for interface 1/1/45: Actor state: ALFO, Partner state PLFO
    2024-05-22T10:47:48.729213+02:00 A8100-48X-E011-124 lacpd[869]: Event|1321|LOG_INFO|AMM|1/1|LAG 2 State change for interface 1/1/45: Actor state: ALFOE, Partner state PLFO
    2024-05-22T10:47:48.730826+02:00 A8100-48X-E011-124 lacpd[869]: Event|1321|LOG_INFO|AMM|1/1|LAG 2 State change for interface 1/1/45: Actor state: ALFOE, Partner state PSFO
    2024-05-22T10:47:48.734238+02:00 A8100-48X-E011-124 lacpd[869]: Event|1321|LOG_INFO|AMM|1/1|LAG 2 State change for interface 1/1/45: Actor state: ALFOX, Partner state PSFO
    2024-05-22T10:47:50.915883+02:00 A8100-48X-E011-124 lacpd[869]: Event|1311|LOG_WARN|AMM|1/1|Partner is lost (timed out) for interface 1/1/45 LAG sport: 1. State: Expired State -> Defaulted State
    2024-05-22T10:47:50.916304+02:00 A8100-48X-E011-124 lacpd[869]: Event|1321|LOG_INFO|AMM|1/1|LAG 2 State change for interface 1/1/45: Actor state: ALFO, Partner state PSFO
    2024-05-22T10:47:50.921249+02:00 A8100-48X-E011-124 lacpd[869]: Event|1321|LOG_INFO|AMM|1/1|LAG 2 State change for interface 1/1/45: Actor state: ALFOE, Partner state PLFOEX
    2024-05-22T10:47:51.792752+02:00 A8100-48X-E011-124 lldpd[1028]: Event|104|LOG_INFO|AMM|1/1|LLDP neighbor 4c:d5:87:51:42:00 added on 1/1/45
    2024-05-22T10:49:12.616812+02:00 A8100-48X-E011-124 intfd[864]: Event|403|LOG_INFO|AMM|1/1|Link status for interface 1/1/46 is up at 10 Gbps with no FEC


  • 2.  RE: LACP-BLOCK sur les ports

    MVP GURU
    Posted May 23, 2024 10:32 AM

    Bonjour,

    Tu as verifie pas d'erreur de câblage ? (un show lldp neighbor ?)



    ------------------------------
    PowerArubaSW : Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP...

    PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...)

    PowerArubaCL: Powershell Module to use Aruba Central

    PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)..

    ACEP / ACMX #107 / ACDX #1281
    ------------------------------



  • 3.  RE: LACP-BLOCK sur les ports

    Posted May 23, 2024 10:54 AM

    tous les ports sont bien UP sur tous les switchs où sont l'aggregat

    et un show lldp neighbor sur chaque switch indique qu'il voit bien les switchs en face




  • 4.  RE: LACP-BLOCK sur les ports

    Posted May 23, 2024 10:55 AM