Issue w/AP not joining... Am I missing a license? I only got two certificates to redeem but AP indicates unlicensed?
(r8-aruba7005-1) #show license-usage ap
AP Licenses
-----------
Type Number
---- ------
AP Licenses 0
RF Protect Licenses 2
PEF Licenses 2
Overall AP License Limit 0
AP Usage
--------
Type Count
---- -----
Active CAPs 0
Standby CAPs 0
RAPs 0
Remote-node APs 0
Tunneled nodes 0
Total APs 0
Remaining AP Capacity
---------------------
Type Number
---- ------
CAPs 0
RAPs 0
(r8-aruba7005-1) #show license
License Table
-------------
Key Installed Expires Flags Service Type
--- --------- ------- ----- ------------
6IVM9ZDJ-54C/VhnH-QCrwNY43-M20+LXpV-ZPKQ5gVl-WTE 2015-10-12 Never E Next Generation Policy Enforcement Firewall Module: 2
10:50:18
Men8iiEe-/MhWqM7+-OyBukkep-OmFmsWJx-t5U39FQk-WWg 2015-10-12 Never E RF Protect: 2
10:50:37
License Entries: 2
Flags: A - auto-generated; E - enabled; R - reboot required to activate
(r8-aruba7005-1) #show keys
Licensed Features
-----------------
Feature Status
------- ------
Access Points 0
RF Protect 2
VPN Server Module 4096
xSec Module 0
Next Generation Policy Enforcement Firewall Module 2
Advanced Cryptography 0
RF Protect ENABLED
Policy Enforcement Firewall ENABLED
VPN Server ENABLED
xSec Module DISABLED
Policy Enforcement Firewall for VPN users DISABLED
Advanced Cryptography DISABLED
Maritime Regulatory Domain DISABLED
(r8-aruba7005-1) #show ap database
AP Database
-----------
Name Group AP Type IP Address Status Flags Switch IP Standby IP
---- ----- ------- ---------- ------ ----- --------- ----------
9c:1c:12:ce:72:ca bxb-300 103 192.168.80.2 Up 8m:51s IL 192.168.88.2 0.0.0.0
Flags: U = Unprovisioned; N = Duplicate name; G = No such group; L = Unlicensed
I = Inactive; D = Dirty or no config; E = Regulatory Domain Mismatch
X = Maintenance Mode; P = PPPoE AP; B = Built-in AP
R = Remote AP; R- = Remote AP requires Auth; C = Cellular RAP;
c = CERT-based RAP; 1 = 802.1x authenticated AP; 2 = Using IKE version 2
u = Custom-Cert RAP; S = Standby-mode AP; J = USB cert at AP
M = Mesh node; Y = Mesh Recovery
Total APs:1
(r8-aruba7005-1) #show log system 10 | include stm
Oct 14 06:58:48 :399899: <INFO> |ipstm| sapi_rsp, sapi.c:248: SAPI response service/level lookup failed
Oct 14 06:58:48 :348306: <DBUG> |ipstm| papi_rcv_cb, Recvd PAPI Message, len=88
Oct 14 06:58:48 :399899: <INFO> |ipstm| sapi_rsp, sapi.c:248: SAPI response service/level lookup failed
Oct 14 06:58:48 :348306: <DBUG> |ipstm| papi_rcv_cb, Recvd PAPI Message, len=88
Oct 14 06:58:48 :399899: <INFO> |ipstm| sapi_rsp, sapi.c:248: SAPI response service/level lookup failed
Oct 14 06:58:49 :348306: <DBUG> |ipstm| papi_rcv_cb, Recvd PAPI Message, len=88
Oct 14 06:58:49 :399899: <INFO> |ipstm| sapi_rsp, sapi.c:248: SAPI response service/level lookup failed
Oct 14 06:58:49 :348306: <DBUG> |ipstm| papi_rcv_cb, Recvd PAPI Message, len=88
Oct 14 06:58:49 :399899: <INFO> |ipstm| sapi_rsp, sapi.c:248: SAPI response service/level lookup failed
Oct 14 06:59:26 :305038: <WARN> |stm| No available license for AP 9c:1c:12:ce:72:ca
(r8-aruba7005-1) #show ap database long
AP Database
-----------
Name Group AP Type IP Address Status Flags Switch IP Standby IP Wired MAC Address Serial # Port FQLN Outer IP User
---- ----- ------- ---------- ------ ----- --------- ---------- ----------------- -------- ---- ---- -------- ----
9c:1c:12:ce:72:ca bxb-300 103 192.168.80.2 Down 192.168.88.2 0.0.0.0 9c:1c:12:ce:72:ca CU0081678 N/A N/A
Flags: U = Unprovisioned; N = Duplicate name; G = No such group; L = Unlicensed
I = Inactive; D = Dirty or no config; E = Regulatory Domain Mismatch
X = Maintenance Mode; P = PPPoE AP; B = Built-in AP
R = Remote AP; R- = Remote AP requires Auth; C = Cellular RAP;
c = CERT-based RAP; 1 = 802.1x authenticated AP; 2 = Using IKE version 2
u = Custom-Cert RAP; S = Standby-mode AP; J = USB cert at AP
M = Mesh node; Y = Mesh Recovery
Port information is available only on 6xx.
Total APs:1