Thank you. but there is more to it than that, right? you need device identities and device profile groups and those need configuration. How do you properly get those setup and make sure they get assigned to the right devices?
Example. I have a data vlan 3 and a voice vlan 10. and i want to be able to have either for those work with lldp on interfaces 1/1/1-1/1/40.
------------------------------
Jeff Hlava
------------------------------
Original Message:
Sent: Feb 09, 2021 03:15 AM
From: Vincent Giles
Subject: LLDP: getting setup
LLDP is enable by default on all interfaces.
So, you should see LLDP exchange and information if the connected device has LLDP enable as well.
------------------------------
Vincent Giles
Original Message:
Sent: Feb 08, 2021 10:18 AM
From: Jeff Hlava
Subject: LLDP: getting setup
I am looking for some good step by step instructions for getting LLDP working on Arubaos CX for a 6300M. I have found some instructions but they either contain just commands and no explanations or they are just explanations with no examples.
I just want to have a group for IP Phones and a group for regular data access ports. Should not be that hard but can't find good instructions.
Thanks
------------------------------
Jeff Hlava
------------------------------