Network Management

 View Only
last person joined: 2 days ago 

Keep an informative eye on your network with IMC and AirWave network management solutions.
Expand all | Collapse all

MD does not display bandwidth usage in airwave

This thread has been viewed 22 times
  • 1.  MD does not display bandwidth usage in airwave

    Posted Nov 30, 2022 08:27 AM
    hi
      The MD is online normally, and the status is normal, but the bandwidth usage cannot be seen. Why?

    ------------------------------
    leo ma
    ------------------------------


  • 2.  RE: MD does not display bandwidth usage in airwave

    EMPLOYEE
    Posted Nov 30, 2022 01:02 PM
    If APs are placed in different group then we don't show usage for controller.

    ------------------------------
    Pavan Arshewar
    Principal Network Engineer

    If my post addresses your query, give kudos!
    ------------------------------



  • 3.  RE: MD does not display bandwidth usage in airwave

    Posted Nov 30, 2022 07:30 PM
    Does this refer to the group of the AP on the MD, or the group on the airwave?

    ------------------------------
    leo ma
    ------------------------------



  • 4.  RE: MD does not display bandwidth usage in airwave

    EMPLOYEE
    Posted Dec 01, 2022 11:19 AM

    Pavan is referring to the group on Airwave.

    On other note are the APs showing any usage or client on Airwave side? Are we having "Prefer Amon Vs SNMP" set to yes under Amp setup --> General --> Additional AMP Services
    Make sure, the amon profile on Controller(default amp) is mapped to Airwave IP address



    ------------------------------
    Vishnu Mannil
    Aruba ERT

    If my post addresses your query, give kudos :)
    ------------------------------



  • 5.  RE: MD does not display bandwidth usage in airwave

    Posted Dec 05, 2022 08:52 AM
    hi
    Both AP and ac are in the same group, and amon vs snmp is yes, but the usage cannot be seen in the controller


    ------------------------------
    leo ma
    ------------------------------



  • 6.  RE: MD does not display bandwidth usage in airwave

    EMPLOYEE
    Posted Dec 05, 2022 11:17 AM
    Please make sure on the controller we have the Amon profile "default-amp" pointed to the Airwave IP address.

    ------------------------------
    Vishnu Mannil
    Aruba ERT

    If my post addresses your query, give kudos :)
    ------------------------------



  • 7.  RE: MD does not display bandwidth usage in airwave

    Posted Dec 06, 2022 07:45 AM

    "default-amp" has pointed to the airwave ip address,



    ------------------------------
    leo ma
    ------------------------------



  • 8.  RE: MD does not display bandwidth usage in airwave

    EMPLOYEE
    Posted Dec 06, 2022 08:47 AM

    Hi Leo,

    Request you to open a TAC case. There are chances that we may not be receiving date or server not processing it. We will need to check this from server point.



    ------------------------------
    Vishnu Mannil
    Aruba ERT

    If my post addresses your query, give kudos :)
    ------------------------------



  • 9.  RE: MD does not display bandwidth usage in airwave

    Posted Dec 06, 2022 09:04 AM
    hi dear
        This is my lab environment, but MD cannot see usage in many scenarios. The total bandwidth can be seen, and the traffic of the client can be seen, including the traffic of each ssid; is this designed in this way?

    ------------------------------
    leo ma
    ------------------------------



  • 10.  RE: MD does not display bandwidth usage in airwave

    EMPLOYEE
    Posted Dec 06, 2022 09:11 AM
    Hi Leo,

    Controller monitor page should show the usage and client details graph when we have APs under it and showing the data. This could be either the graphs in not updating or processing data. Could you email me the details on mannil@hpe.com

    ------------------------------
    Vishnu Mannil
    Aruba ERT

    If my post addresses your query, give kudos :)
    ------------------------------



  • 11.  RE: MD does not display bandwidth usage in airwave

    EMPLOYEE
    Posted Dec 09, 2022 09:51 AM
    Issue is addressed post enabling   AMON_BSSID_TUNNEL_STATS_MESSAGE on the controller side for the AMON messages. Marking the thread as resolved.

    ------------------------------
    Vishnu Mannil
    Aruba ERT

    If my post addresses your query, give kudos :)
    ------------------------------