Network Management

 View Only
  • 1.  MIB`s for PRTG Network Monitor

    Posted Jan 03, 2024 06:07 AM

    Hey,
    I am looking for HPE MIB for sensors for PRTG Network Monitor software.
    I mainly use HP5510, HP5500, HP5520 switches.
    My problem is that I cannot find suitable sensors for these switches in the PRTG Network Monitor software. And they referred me to HPE to request a MIB.
    Thanks.



  • 2.  RE: MIB`s for PRTG Network Monitor

    Posted Jan 03, 2024 06:08 AM

    Check here on ASP.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------



  • 3.  RE: MIB`s for PRTG Network Monitor

    Posted Jan 16, 2024 10:45 AM

    I am also wanting an MIB for PRTG but for CPPM. I downloaded the aruba-cppm.my file but it has "FROM ARUBA-MIB" on line 26 so it doesn't accept the MIB. Do you know if I need to adjust the MIB I have downloaded or where I can get the ARUBA-MIB file?