Wireless Access

for L3 mobility master redundancy, I want to add a second VM machine as a standby MM. now all my MDs are pointing to the existing MM and they are not configured for L3 redundancy (L3 redundancy is disabled on all my MDs)

Is there a way to add this on my MD's or do I need to reconfigure them from 0 ?

thanks

------------------------------
ioanf
------------------------------

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
------------------------------

Original Message:
Sent: Aug 10, 2021 08:22 AM
From: ioan fitigau
Subject: MM l3 redundancy

for L3 mobility master redundancy, I want to add a second VM machine as a standby MM. now all my MDs are pointing to the existing MM and they are not configured for L3 redundancy (L3 redundancy is disabled on all my MDs)

Is there a way to add this on my MD's or do I need to reconfigure them from 0 ?

thanks

------------------------------
ioanf
------------------------------

I dont have this option on my controllers, we are running 8.5.0.10 AOS

but I just find out I can enable it from the cli, dont know why I cannot do it from the web interface

------------------------------
ioanf
------------------------------

Original Message:
Sent: Aug 10, 2021 05:45 PM
From: Colin Joseph
Subject: MM l3 redundancy

In configuration> Controllers, you would enable L3 redundancy and those options can be configured.  This can be configured at a higher folder so that it propagates to all controllers in that folder and below.   There is a secondary controller option just below it.

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

Original Message:
Sent: Aug 10, 2021 08:22 AM
From: ioan fitigau
Subject: MM l3 redundancy

for L3 mobility master redundancy, I want to add a second VM machine as a standby MM. now all my MDs are pointing to the existing MM and they are not configured for L3 redundancy (L3 redundancy is disabled on all my MDs)

Is there a way to add this on my MD's or do I need to reconfigure them from 0 ?

thanks

------------------------------
ioanf
------------------------------

@ioanf you can configure this from the MM GUI, but you need to​ define it on the MDs individually. From your Managed Network hierarchy, click on the MD's below the folder you were in and you will see the options appear like Colin's.

------------------------------
Scott Nyer
------------------------------

Original Message:
Sent: Aug 11, 2021 01:48 AM
From: ioan fitigau
Subject: MM l3 redundancy

I dont have this option on my controllers, we are running 8.5.0.10 AOS

but I just find out I can enable it from the cli, dont know why I cannot do it from the web interface

------------------------------
ioanf

Original Message:
Sent: Aug 10, 2021 05:45 PM
From: Colin Joseph
Subject: MM l3 redundancy

In configuration> Controllers, you would enable L3 redundancy and those options can be configured.  This can be configured at a higher folder so that it propagates to all controllers in that folder and below.   There is a secondary controller option just below it.

------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.

Original Message:
Sent: Aug 10, 2021 08:22 AM
From: ioan fitigau
Subject: MM l3 redundancy

for L3 mobility master redundancy, I want to add a second VM machine as a standby MM. now all my MDs are pointing to the existing MM and they are not configured for L3 redundancy (L3 redundancy is disabled on all my MDs)

Is there a way to add this on my MD's or do I need to reconfigure them from 0 ?

thanks

------------------------------
ioanf
------------------------------