I fancied another go at the scheduled upgrade for one of the other clusters, and this time, after entering the same info apart from the date/time, it worked, with the upgrade specified for over 24 hours from now. But when I try to set an upgrade off just 30 mins from now, it doesn't work. I don't care about that as I want the production clusters doing their thing in the small hours of the morning, so, we're good. Nothing to see here.
![](https://higherlogicdownload.s3.amazonaws.com/HPE/MessageImages/f4e10e0527044a549b0498e595e5ac7e.png)
![](https://higherlogicdownload.s3.amazonaws.com/HPE/MessageImages/19c79413c2d442119dc0656e251d0a43.png)
![](https://higherlogicdownload.s3.amazonaws.com/HPE/MessageImages/67cf4601286b4f319b75dec1205ccd82.png)
Original Message:
Sent: Feb 24, 2023 10:36 AM
From: n.millward
Subject: Mobility Conductor 8.10.0.6 LSR unable to update MD cluster
audit-trail is interesting - no error, but can see the commands. Where I've been trying to get the process to work
NODE:"/mm/mynode" COMMAND:<lc-cluster RAP schedule upgrade version 8.10.0.6_86193 2023 02 24 12 00 00 > -- command executed successfully
Even though execution was successful there was no indication of it, and nothing happened to the controllers. I tried at 11:30 this morning too.
there are then a few lines in the logs before I did the manual 'Now' upgrade. No idea what the <show switches> fails are though:
Feb 24 11:59:40 2023 cli[24430]: ******@****** NODE:"/md/Lancaster/00:1a:1e:06:67:80" COMMAND:<mdc > -- command executed successfully
Feb 24 12:08:15 2023 nanny[73563]: USER:admin NODE:"/mm/mynode" COMMAND:<show switches > -- command execution failed
Feb 24 12:39:18 2023 nanny[73563]: USER:admin NODE:"/mm/mynode" COMMAND:<show switches > -- command execution failed
Feb 24 13:10:20 2023 nanny[73563]: USER:admin NODE:"/mm/mynode" COMMAND:<show switches > -- command execution failed
Feb 24 13:41:23 2023 nanny[73563]: USER:admin NODE:"/mm/mynode" COMMAND:<show switches > -- command execution failed
Feb 24 14:12:26 2023 nanny[73563]: USER:admin NODE:"/mm/mynode" COMMAND:<show switches > -- command execution failed
Feb 24 14:36:04 2023 cluster_upgrade_mgr[74409]: USER:admin@system-internal NODE:"/mm/mynode" COMMAND:<airmatch ap-partition start RAP > -- command executed successfully
Feb 24 14:36:04 2023 webui[73699]: USER:******@****** NODE:"/mm/mynode" COMMAND:<lc-cluster RAP initiate upgrade version 8.10.0.6_86193 fileserver scp username ****** password **** ****** /networking/equip/firmware/aruba-wifi/mc partition 0 > -- command executed successfully
------------------------------
Nathan
Original Message:
Sent: Feb 24, 2023 09:59 AM
From: cjoseph
Subject: Mobility Conductor 8.10.0.6 LSR unable to update MD cluster
On the MM, type "show audit-trail" to see if any commands were executed or if there was an error.
------------------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
HPE Design and Deploy Guides: https://community.arubanetworks.com/support/migrated-knowledge-base?attachments=&communitykey=dcc83c62-1a3a-4dd8-94dc-92968ea6fff1&pageindex=0&pagesize=12&search=&sort=most_recent&viewtype=card
Original Message:
Sent: Feb 24, 2023 07:08 AM
From: n.millward
Subject: Mobility Conductor 8.10.0.6 LSR unable to update MD cluster
Hi
Just deployed the 8.10 LSR to our MC cluster. No problem there. But something's failing as I try to schedule update our clusters to 8.10.
There's a profile configured, and the software available via SCP in a folder.
But I'm not getting the notification in the banner to indicate an upgrade is scheduled as per guide below:
"A scheduled upgrade icon in the banner indicates that one or more clusters are scheduled for upgrade. Hovering over the scheduled upgrade icon opens a pop-up which lists the number of clusters that are scheduled for upgrade. Click the number in the pop-up to open the Managed Network node hierarchy table. The Managed Network node hierarchy table is filtered to list only the clusters that are scheduled for upgrade."
After clicking 'Install' on the Install Confirmation warning about performance being impacted, the orange progress bar rolls across the top of the browser, and I'm returned to the default MC Software Management page.
I've not tried CLI yet.
Any thoughts why GUI might be failing?
Thanks.
![](https://higherlogicdownload.s3.amazonaws.com/HPE/MessageImages/8aa3abe9a4a347b6ad9ed20c5e53a49d.png)
------------------------------
Nathan
------------------------------