Network Management

Hi,

I've configured CPPM to act as a RADIUS server, assigning VLANs and user-roles to users. Since multiple roles can share a VLAN, I'd like to know if there's a way to monitor network traffic usage for each user-role individually

Does anyone have any ideas on how to handle this?

Thanks a lot

What Network Management Solution do you have in place?
I am not aware that you can get this information by CPPM. Insight gives you Accounting Information based on User / Endpoint Type but not by VLAN or User-Roles.

Hi,

I've configured CPPM to act as a RADIUS server, assigning VLANs and user-roles to users. Since multiple roles can share a VLAN, I'd like to know if there's a way to monitor network traffic usage for each user-role individually

Does anyone have any ideas on how to handle this?

Thanks a lot

Hello,
In addition to CPPM, what solution do you have in place, do you have in your Airwave network solution, Aruba Central? To see how you could do the monitoring you mentioned by user-role. 

What Network Management Solution do you have in place?
I am not aware that you can get this information by CPPM. Insight gives you Accounting Information based on User / Endpoint Type but not by VLAN or User-Roles.

Hi,

I've configured CPPM to act as a RADIUS server, assigning VLANs and user-roles to users. Since multiple roles can share a VLAN, I'd like to know if there's a way to monitor network traffic usage for each user-role individually

Does anyone have any ideas on how to handle this?

Thanks a lot

Hi Daniel and Cordless,

I'm using Airwave to monitor clients per SSID and their traffic usage. However, I'm not sure if it can track traffic usage based on user-role.

Do you know how to do this?

Thank you for your reply.

Hello,
In addition to CPPM, what solution do you have in place, do you have in your Airwave network solution, Aruba Central? To see how you could do the monitoring you mentioned by user-role. 

What Network Management Solution do you have in place?
I am not aware that you can get this information by CPPM. Insight gives you Accounting Information based on User / Endpoint Type but not by VLAN or User-Roles.

Hi,

I've configured CPPM to act as a RADIUS server, assigning VLANs and user-roles to users. Since multiple roles can share a VLAN, I'd like to know if there's a way to monitor network traffic usage for each user-role individually

Does anyone have any ideas on how to handle this?

Thanks a lot

Under Client session Report, there's option to run 'session Data by Role' . This should give total usage and more other options per role. you can just run custom report to have this option only instead of running the entire Client session report.

------------------------------
Regards
Gowri Amujuri

Original Message:
Sent: Nov 13, 2024 04:30 AM
From: tigerbt
Subject: Monitor traffic usage for each user-role

Hi Daniel and Cordless,

I'm using Airwave to monitor clients per SSID and their traffic usage. However, I'm not sure if it can track traffic usage based on user-role.

Do you know how to do this?

Thank you for your reply.

Original Message:
Sent: Nov 12, 2024 03:24 AM
From: Daniel Ruiz
Subject: Monitor traffic usage for each user-role

Hello,
In addition to CPPM, what solution do you have in place, do you have in your Airwave network solution, Aruba Central? To see how you could do the monitoring you mentioned by user-role. 

------------------------------
Daniel Ruiz
-----------------------
Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or Aruba Networks.
If you have urgent issues, always contact your Aruba partner, distributor, or Aruba TAC Support.
Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact Aruba TAC.

Original Message:
Sent: Nov 12, 2024 03:00 AM
From: cordless
Subject: Monitor traffic usage for each user-role

What Network Management Solution do you have in place?
I am not aware that you can get this information by CPPM. Insight gives you Accounting Information based on User / Endpoint Type but not by VLAN or User-Roles.

Original Message:
Sent: Nov 12, 2024 12:00 AM
From: tigerbt
Subject: Monitor traffic usage for each user-role

Hi,

I've configured CPPM to act as a RADIUS server, assigning VLANs and user-roles to users. Since multiple roles can share a VLAN, I'd like to know if there's a way to monitor network traffic usage for each user-role individually

Does anyone have any ideas on how to handle this?

Thanks a lot