Wireless Access

 View Only
Back to discussions
Expand all | Collapse all

MSM760: VSC Signals continue going up and down

This thread has been viewed 0 times

  • 1.  MSM760: VSC Signals continue going up and down

    Posted Jul 31, 2015 10:41 AM

    hi all,

     

    we have this problem since ages (and different fw levels): our ap were all MSM310 operating at 2.4 GHz, with autochannel selected.

     

    Performance is quite bad: using simple tools (smartphone app or windows programs like acrylic) its evident that the singals continuosly go down, than come up again.

     

    Yesterday the fw has been updated to 6.5.3.0-22590: no changes.

     

    Than I have found a couple of MSM410 APs, so i installed them in place of 2 MSM310, and configured to operate at 5 GHz.

    After installing the first one,  the 5Ghz signal appeared good and stable.

    I've installed the second one, it has self deployed on same channel (36) even if the 2 Ap are very close (15 meters, no significant obstacles between them). The signals at 5 GHz become unstable just like the 2.4 ones!

     

    I tried to manual configure an ap at channel 36 and the other at channel 40. No changes.

     

    That's really a nightmare....



Related Content