Wireless Access

 View Only

  • 1.  MSR 3026 : I am not able to enable NAT.

    Posted Mar 17, 2025 05:12 AM

    I have MSR3026 and want to enable NAT operations.

    When i enable NAT i get below error:

    [HPE-GigabitEthernet0/15]nat static enable
    Failed to initialize daemon.Failed to initialize apr module.[HPE-GigabitEthernet0/15]%Mar 14 13:54:01:581 2025 HPE SCMD/4/PROCESS_ABNORMAL: The process aprd exited abnormally. ServiceName=APR, ExitCode=255, KillSignal=NA, StartTime=2025-03-14 13:54:00, StopTime=2025-03-14 13:54:01.

    Could someone help here?



  • 2.  RE: MSR 3026 : I am not able to enable NAT.

    Posted Mar 18, 2025 04:50 AM

    This may be a known issue. Please upgrade to the latest firmware and check again.



    ------------------------------
    Herman Robers
    ------------------------
    If you have urgent issues, always contact your HPE Aruba Networking partner, distributor, or Aruba TAC Support. Check https://www.arubanetworks.com/support-services/contact-support/ for how to contact HPE Aruba Networking TAC. Any opinions expressed here are solely my own and not necessarily that of Hewlett Packard Enterprise or HPE Aruba Networking.

    In case your problem is solved, please invest the time to post a follow-up with the information on how you solved it. Others can benefit from that.
    ------------------------------

    Original Message


Related Content