Network Management

Hello,

I am currently trying to generate a report containing all client sessions details, containing session start & end time, client @mac, ap @mac, client IP address, average SNR, average RSSI,... So each line corresponds to a session. 
Is there a way to get this ? 

 Thanks! 

Hi,

In Client Session Report, there's Advanced options, click 'show' to see the option to 'Include details about every client'. Set that to yes and select the columns that are needed in the report. This will provide details of every session. 

The reason those options are hidden is because of the load it generates. The more the clients and/or sessions, the report can be very huge and can cause perfromance issues to the server. 

Hello,

I am currently trying to generate a report containing all client sessions details, containing session start & end time, client @mac, ap @mac, client IP address, average SNR, average RSSI,... So each line corresponds to a session. 
Is there a way to get this ? 

 Thanks! 

Hi, 

I was lookingo the same information, but can obtain SNR, RSSI, or packet lost information related to each client session. 

Do you know the mapping for those metrics?

• avg. usage (kbps)
• avg. signadl (dBm)
• avg. signal quality 

All the information is at the controller, but I can not find it at the airwave.

Thanks for your help.

Leire

Hi,

In Client Session Report, there's Advanced options, click 'show' to see the option to 'Include details about every client'. Set that to yes and select the columns that are needed in the report. This will provide details of every session. 

The reason those options are hidden is because of the load it generates. The more the clients and/or sessions, the report can be very huge and can cause perfromance issues to the server. 

Hello,

I am currently trying to generate a report containing all client sessions details, containing session start & end time, client @mac, ap @mac, client IP address, average SNR, average RSSI,... So each line corresponds to a session. 
Is there a way to get this ? 

 Thanks! 

Hi,

The Average values are calculated based on the datapoints to the time of report or time of client session whichever is met first.

If you are looking at usage, Signal quality of current client or historical client, it will be in the Client > Monitoring page.

Hi, 

I was lookingo the same information, but can obtain SNR, RSSI, or packet lost information related to each client session. 

Do you know the mapping for those metrics?

• avg. usage (kbps)
• avg. signadl (dBm)
• avg. signal quality 

All the information is at the controller, but I can not find it at the airwave.

Thanks for your help.

Leire

Hi,

In Client Session Report, there's Advanced options, click 'show' to see the option to 'Include details about every client'. Set that to yes and select the columns that are needed in the report. This will provide details of every session. 

The reason those options are hidden is because of the load it generates. The more the clients and/or sessions, the report can be very huge and can cause perfromance issues to the server. 

Hello,

I am currently trying to generate a report containing all client sessions details, containing session start & end time, client @mac, ap @mac, client IP address, average SNR, average RSSI,... So each line corresponds to a session. 
Is there a way to get this ? 

 Thanks! 

Thank you four your help, I realize that I need to schedule the report every day, to obtain the useful information. I can 

But, sorry, in my previous message It told that I can get SNR, RSSI, ... but in fact, I'm not sure if I can get it from the reports. 

I use the Client Session repot, to obtain information for each session, and Session Data by Client, where I can obtain a lot of information for each session and client. However,  I'm not sure if the avg.usage, the avg. signal and the avg. signal quality are goodput/throughput, RSSI and SNR.

Do you know  where I can find the information related to those relations?

I also can't find the information about lost packages or frames, which I can see in the mobility conductor/master. but not in the airwave.

Thanks in advance for your help. 

Hi,

The Average values are calculated based on the datapoints to the time of report or time of client session whichever is met first.

If you are looking at usage, Signal quality of current client or historical client, it will be in the Client > Monitoring page.

Hi, 

I was lookingo the same information, but can obtain SNR, RSSI, or packet lost information related to each client session. 

Do you know the mapping for those metrics?

• avg. usage (kbps)
• avg. signadl (dBm)
• avg. signal quality 

All the information is at the controller, but I can not find it at the airwave.

Thanks for your help.

Leire

Hi,

In Client Session Report, there's Advanced options, click 'show' to see the option to 'Include details about every client'. Set that to yes and select the columns that are needed in the report. This will provide details of every session. 

The reason those options are hidden is because of the load it generates. The more the clients and/or sessions, the report can be very huge and can cause perfromance issues to the server. 

Hello,

I am currently trying to generate a report containing all client sessions details, containing session start & end time, client @mac, ap @mac, client IP address, average SNR, average RSSI,... So each line corresponds to a session. 
Is there a way to get this ? 

 Thanks!