it will work for bridge and split tunnel, but you're right not for tunnel mode.try the following for tunneled enet ports from the controller CLIa. find the tunnel ids for that RAP's enet tunnelsb. dump the bridge table filtering by tunnel ids from a> abovee.g.1) show datapath tunnel | include <ip of the ap> (for RAP use the inner ip not outer)2) note the tunnels with 'type' (5th column) values starting with 81xx, e.g. 8130 is the 3rd enet port
2609 126.96.36.199 10.1.1.2 47 8130 13003) now dump the bridge table filtering by tunnel idshow datapath bridge | include 2609if you dig out multiple ids for the same AP, separate them by comma, e.g.show datapath bridge | include 2609,4533,1234
At Aruba, we believe that the most dynamic customer experiences happen at the Edge. Our mission is to deliver innovative solutions that harness data at the Edge to drive powerful business outcomes.
© Copyright 2021 Hewlett Packard Enterprise Development LPAll Rights Reserved.