Hi,
Annoying problem which is possibly show stopper while trying to transform from 2540 to 6100 series...
Earlier in AOS switches had interface level configuration possibility of "
poe-allocate-by value" where there was possible to allocate "
poe-value 30" to satisfy non-lldp, bad behaving, NDI cameras (like BirdDog P200) and good quality PoE+ powered speakers (like Genelec 4430 SmartIP where first version needed 27.5W to startup)
Now this parameter has gone and I cannot find any other way to allocate PoE+ max value to port... Any idea is there way in AOS-CX to allocate 30W of poe to interface other than using (quite expensive) poe injector or Cisco SG/CBS switches which has 31.5W poe allocation by default (and way more bad chipsets in hardware ;) )
------------------------------
Jori Luoto
------------------------------