Internet of Things (IoT) and Industrial IoT (IIoT)

 View Only
Back to discussions
Expand all | Collapse all

QoS Aruba 9200 (AOS-CX)

This thread has been viewed 13 times

  • 1.  QoS Aruba 9200 (AOS-CX)

    Posted Oct 29, 2021 12:57 AM
    I have an Aruba 6200F that I am using to replace an old Cisco 2960 with.  I have some QoS commands, would anyone know the equivilant to:

    mls qos map policed-dscp 0 10 18 24 46 to 8
    mls qos map cos-dscp 0 8 16 24 32 46 48 56
    mls qos srr-queue output cos-map queue 1 threshold 3 4 5
    mls qos srr-queue output cos-map queue 2 threshold 1 2
    mls qos srr-queue output cos-map queue 2 threshold 2 3
    mls qos srr-queue output cos-map queue 2 threshold 3 6 7
    mls qos srr-queue output cos-map queue 3 threshold 3 0
    mls qos srr-queue output cos-map queue 4 threshold 3 1
    mls qos srr-queue output dscp-map queue 1 threshold 3 32 33 40 41 42 43 44 45
    mls qos srr-queue output dscp-map queue 1 threshold 3 46 47
    mls qos srr-queue output dscp-map queue 2 threshold 1 16 17 18 19 20 21 22 23
    mls qos srr-queue output dscp-map queue 2 threshold 1 26 27 28 29 30 31 34 35
    mls qos srr-queue output dscp-map queue 2 threshold 1 36 37 38 39
    mls qos srr-queue output dscp-map queue 2 threshold 2 24
    mls qos srr-queue output dscp-map queue 2 threshold 3 48 49 50 51 52 53 54 55
    mls qos srr-queue output dscp-map queue 2 threshold 3 56 57 58 59 60 61 62 63
    mls qos srr-queue output dscp-map queue 3 threshold 3 0 1 2 3 4 5 6 7
    mls qos srr-queue output dscp-map queue 4 threshold 1 8 9 11 13 15
    mls qos srr-queue output dscp-map queue 4 threshold 2 10 12 14
    mls qos queue-set output 1 threshold 1 100 100 50 200
    mls qos queue-set output 1 threshold 2 125 125 100 400
    mls qos queue-set output 1 threshold 3 100 100 100 400
    mls qos queue-set output 1 threshold 4 60 150 50 200
    mls qos queue-set output 1 buffers 15 25 40 20
    mls qos

    class-map match-all AUTOQOS_VOIP_DATA_CLASS
    match ip dscp ef
    class-map match-all AUTOQOS_DEFAULT_CLASS
    match access-group name AUTOQOS-ACL-DEFAULT
    class-map match-all AUTOQOS_VOIP_SIGNAL_CLASS
    match ip dscp cs3
    !
    policy-map AUTOQOS-SRND4-CISCOPHONE-POLICY
    class AUTOQOS_VOIP_DATA_CLASS
    set dscp ef
    police 128000 8000 exceed-action policed-dscp-transmit
    class AUTOQOS_VOIP_SIGNAL_CLASS
    set dscp cs3
    police 32000 8000 exceed-action policed-dscp-transmit
    class AUTOQOS_DEFAULT_CLASS
    set dscp default
    police 10000000 8000 exceed-action policed-dscp-transmit

    interface GigabitEthernet1/0/2
    switchport access vlan 5
    switchport mode access
    switchport voice vlan 50
    srr-queue bandwidth share 1 30 35 5
    priority-queue out
    mls qos trust device cisco-phone
    mls qos trust cos
    auto qos voip cisco-phone
    spanning-tree portfast
    service-policy input AUTOQOS-SRND4-CISCOPHONE-POLICY
    !


    Thanks for any guidance, I am not familiar at all with QoS.

    ------------------------------
    Stephen Conway
    ------------------------------


Related Content