Wired Intelligent Edge

 View Only
  • 1.  QOS implementation

    Posted Feb 13, 2019 11:32 PM

    Hi Everyone!

     

    I am implementing QOS on 2930F but not able to get enough information in the configuration guide.

     

    Any suggestions would be of great help. Thank you!



  • 2.  RE: QOS implementation

    Posted Feb 14, 2019 12:02 AM

    Would be great if you can explain what you are trying to achieve.

     

    Ch#7 of following books covers QoS in detail:

    https://support.hpe.com/hpsc/doc/public/display?docId=a00038764en_us



  • 3.  RE: QOS implementation

    Posted Feb 18, 2019 09:47 AM

    Thanks for the response!

    I was trying to mimic the auto qos implementation of Cisco on Aruba & i dint see any supporting/relating commands for Aruba. I guess that leaves me to manualy configure & keep qos consistent across the switched network  & I was searching for relevant documents.

     



  • 4.  RE: QOS implementation

    Posted Feb 18, 2019 10:51 AM

    Hi Rakesh,

     

    Maybe this discussion could help you:

     

    https://community.arubanetworks.com/t5/Wired-Intelligent-Edge-Campus/ARUBA-SWITCH-AND-IP-PHONES/m-p/309892#M2398

     

    Here you can find an external link with some information about a similar commad to Cisco Auto QoS.

     

    Regards



  • 5.  RE: QOS implementation