Wireless Access

 View Only
last person joined: 4 days ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

RAPNG with AP503

This thread has been viewed 4 times

  • 1.  RAPNG with AP503

    Posted Sep 10, 2024 11:20 AM

    Hello,

    we have implemeted a RAPNG-solution with Aruba 7010 controller running an AOS 6.5.4.24 and a couple IAP-cluster running on 8.10.0.13. This is working fine.

    Now we have a request to add an IAP-cluster of AP503 that is running on AOS 8.11.02. The L2TPover IPSec-Tunnel is not comming up. 

    Is there any chance to get this up and running without upgrading the controller?

    Kind Regards

    Uwe



  • 2.  RE: RAPNG with AP503

    EMPLOYEE
    Posted Sep 10, 2024 01:07 PM

    Probably not.

    Why wouldn't you upgrade the controller to something that is actually supported?  AOS 6.5 is EOL.

    The AP-503 needs AOS 8.11.1.0 at least, minimum running version at this point should be the latest 8.12.x.x release.



    ------------------------------
    Carson Hulcher, ACEX#110
    ------------------------------

    Original Message


  • 3.  RE: RAPNG with AP503

    Posted Sep 11, 2024 05:25 AM

    Hi Carson,

    Since we have a number of IAP clusters connected to the controller running on 6.5.4.x and 8.10.x ,we fear negative effects on the existing tunnels if we upgrade the controller to Release 8.x.

    Best Regards

    Uwe


    Original Message